HFP01 heat flux sensor

HFP01 is the world’s most popular sensor for heat flux measurement
HFP01 heat flux plate
Heat flux plate

HFP01 is the world’s most popular sensor for heat flux measurement in the soil as well as through walls and building envelopes. The total thermal resistance is kept small by using a ceramics-plastic composite body. The sensor is very robust and stable. It is suitable for long term use on one location as well as repeated installation when a measuring system is used at multiple locations. If measuring in soil, in case a more accurate measurement is needed the model HFP01SC should be considered.

Specifications
Measurand
  • heat flux
Measurement range
  • -2000 to +2000 W/m²
Sensitivity (nominal)
  • 60 x 10⁻⁶ V/(W/m²)
Would you like a personalised quote?

or contact us: info@huksefluxindia.com

Specifications

Measurand
  • heat flux
Measurement range
  • -2000 to +2000 W/m²
Sensitivity (nominal)
  • 60 x 10⁻⁶ V/(W/m²)
Sensing area
  • 8 x 10⁻⁴ m²
Guard width to thickness ratio
  • 5 m/m (as required by ISO 9869 D.3.1)
Sensor thermal resistance
  • 71 x 10⁻⁴ K/(W/m²)
Sensor thickness
  • 5.4 x 10⁻³ m
Uncertainty of calibration
  • ± 3 % (k = 2)
Rated operating temperature range
  • -30 to +70 °C
Cable diameter
  • 4 x 10⁻³ m
IP protection class
  • IP67
Standard cable length
  • 5 m
Options
  • longer cable length (10, 15, 20, 30, 40 m)
Options
  • longer cable, in multiples of 5 m, cable lengths above 20 m in multiples of 10 m
  • LI19 hand held readout unit
Manuals & Downloads

Description

HFP01 is the world’s most popular sensor for heat flux measurement

The world’s most popular sensor for heat flux measurement

HFP01 measures heat flux through the object in which it is incorporated or on which it is mounted, in W/m². The sensor in HFP01 is a thermopile. This thermopile measures the temperature difference across the ceramics-plastic composite body of HFP01. A thermopile is a passive sensor; it does not require power. Using HFP01 is easy. It can be connected directly to commonly used data logging systems. The heat flux in W/m² is calculated by dividing the HFP01 output, a small voltage, by the sensitivity. The sensitivity is provided with HFP01 on its calibration certificate. A typical measurement location is equipped with 2 or more sensors. HFP01 is the world’s most popular sensor for heat flux measurement in the soil as well as through walls and building envelopes.

HFP01 heat flux plate

Robust and stable

Equipped with heavy-duty cabling, protective covers on both sides and potted so that moisture does not penetrate the sensor, HFP01 has proven to be very robust and stable. It survives longterm installation in soils, as well as repeated installation when a measuring system such as TRSYS01 is used at multiple locations.

Suggested use

  • building heat flux
  • U-value and R-value measurements
  • soil heat flux
HFP01 heat flux sensor
HFP01 is the world’s most popular sensor for heat flux measurement
  • low thermal resistance (essential for use on walls and windows)
  • large guard area (required by the ISO 9869 standard)
  • low electrical resistance (low pickup of electrical noise)
  • high sensitivity (good signal to noise ratio in low-flux environments such as buildings)
  • robustness, including a strong cable
  • IP protection class: IP67 (essential for outdoor application)
Would you like a personalised quote?

or contact us: info@huksefluxindia.com